Clips are made of high quality material, which allows them to be highly resistant to traction so that heavy pieces can be adjusted fast and effectively.
Clips have side cuts (patented), which allow us to remove them easily, just with a knock on the side in the joint direction, when the work is finished (mortar setting).
Wedges are reusable and they have round edges to not damage ceramics.
Special design of saw shaped teeth makes adjustments easy.
Use same wedge with high clips and wedge base.
The main characteristic is its scale bar for the ceramics thickness (patented system). The scale bar allows us to adjust the tool to the pressure needed easily, quickly and effectively.
If higher pressure is needed, the tool can be adjusted one more point without causing the crosshead breakage or any other inconvenience.
The parts in contact with the tile are made of plastic to avoid damaging the ceramic tiles.
Starter kit is a perfect way to begin using leveling system.
The kit consists of 100 clips, 100 wedges and pliers
Wedge base have been made to extend the functionalities of our system allowing us to work with tile thicknesses from 3mm to 5mm (1/8" to 1/4")
High clips are designed for thicker tiles and stone like granite or marble.
Allow us to work between 17mm and 30mm (3/4" and 1- 1/4")
Tile leveling system
The most innovative, fast and 100% effective tool allowing to obtain a perfect, lippage-free finish.
Peygran® levelling clip and wedge system ensures flatness between tiles avoiding movements during the mortar setting.
This system helps to reduces the tile installation, minimizes the effort and maximizes installers productivity allowing to achieve a perfect flat, lippage free finish.
How to use
Insert the wedge into the clip and tighten by hand or using pliers.
1. Insert the clip
Spread the cement with trowel and lay first tile at the level. Depends of tile size insert two or more clips for every edge of the tile.
4. Reusable wedges
Collect all reusable wedges, you can use them on your next projects.
3. Clips removal
After necessary time, remove clips by hitting on them with a rubber mallet or with your foot in direction of the grout joint.